Tv + Vcr; Getting Started - RCA J20542 User Manual

TV + VCR

1. Connect your TV to your VCR
A. Connect a coaxial cable to the CABLE/ANTENNA jack on your TV and to the Output Jack on your VCR
(sometimes labeled OUT TO TV).
B. Connect the audio/video cables. Connect audio cables (white and red) to the AUDIO R and L/MONO jacks
on the back of the TV and to the Audio Output Jacks on the VCR (sometimes labeled OUT R L).
C. Connect the video cable (yellow) to the VIDEO jack on the back of the TV and to the Video Output Jack
on the VCR.
2. Connect cable or antenna to your VCR
Connect the coaxial cable from your cable outlet or antenna to the Input Jack on your VCR (sometimes
labeled IN FROM ANTENNA or IN FROM ANT).
Chapter 1
TV
VIDEO AUDIO
R L /MONO
IN
R
L
R
OUT
1C
1B
S-VIDEO
IN
VCR
VIDEO AUDIO
OUT
R L
IN
R L
Note: The back of your TV might vary from the above graphic. Go to
the next page for information on the back panel.
Graphics contained within this publication are for representation only.
DSCI PORT
CABLE/
ANTENNA
1A
IN FROM ANT
CH3
CH4
OUT TO TV
2
From Cable
or Antenna

Getting Started

3