Playing A Tape; Operating Instructions; To Play A Tape - RCA 1543007A User Manual

Playing a Tape

Operating Instructions

To Play a Tape

16
WAKE UP TIMER STOP REC REW F FWD VOL-
POWER PLAY
EJECT PAUSE
Safety Tab
1. Insert a tape in the TV/VCR.
The TV/VCR automatically turns on. The tape
automatically begins to play if the safety tab on the
cassette has been removed and the Auto Play feature has
been turned on.
2. Press PLAY, if necessary.
The word PLAY and the time counter appear on the
screen.
3. If necessary, while the tape is playing, press TRACKING +
or - on the remote or CHAN up or down on the TV/VCR to
remove any streaks from the picture. Details are on page 18
4. Press STOP on the remote or STOP/EJECT on the
TV/VCR to stop playback.
5. Press REW to rewind the tape. If the VCR is playing a tape
when the REW button is pressed, the TV/VCR will search
backwards through the tape. If the REW button is pressed
while the TV/VCR is not playing a tape, the tape will
rewind back to its start.
• After the tape reaches its end during playback, it will
automatically rewind back to the beginning of the tape
and eject the tape.
• Pressing the remote's OFF button while the tape is
rewinding will not stop the tape. The tape will continue
to rewind until it reaches its beginning, and then the
TV/VCR will turn off.
6. Press FF to advance the tape. If the VCR is playing a tape
when the FF button is pressed, the TV/VCR will search
forward through the tape.
7. Press STOP/EJECT on the TV/VCR to eject the tape once
it is completely rewound.
A cassette may be ejected if the power is turned off.
Important: In DC mode, you must turn on the TV/VCR to
eject a tape.
VOL+ CH CH
AUDIO IN
VIDEO IN