Table of Contents
Advertisement
Troubleshooting
Most problems you encounter with your TV/DVD can be corrected by consulting the following troubleshooting list.
Note for US customers: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your
home for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this service, call
1-888-206-3359. For additional assistance while using your RCA product, please visit www.rca.com/customersupport.
DVD Problems
Player won't work
•
Reset the TV/DVD by unplugging the AC power cord and plugging it back in.
Disc won't play
•
Insert a disc with the label side facing up.
•
Check the type of disc you put into the disc tray. This TV/DVD only plays DVD video discs, Video CDs, audio CDs and mp3s.
•
Both the TV/DVD and the disc are coded by region. If the regional codes don't match, the disc can't be played. This TV/DVD is
Region No. 1.
Play starts, but then stops immediately
•
The disc is dirty. Clean it.
•
Condensation has formed. Allow player to dry out.
No sound or distorted sound
•
Make sure your TV/DVD is connected properly. Make sure all cables are securely inserted into the appropriate jacks.
•
Sound is muted during still, frame advance, or slow-motion play.
Can't advance through a movie
•
You can't advance through the opening credits and warning information that appear at the beginning of movies because the disc is
programmed to prohibit that action.
The
icon appears on screen
•
The feature or action cannot be completed at this time because:
1.
The disc's software restricts it.
2.
The disc's software doesn't support that feature (e.g., angles).
3.
The feature is not available at the moment.
4.
You've requested a title or chapter number that is out of range.
The picture is distorted
•
The disc might be damaged. Try another disc.
Picture is distorted during forward and reverse scan
•
It is normal for some distortion to appear while scanning.
A screen saver appears on the screen
•
Your TV/DVD is equipped with a screen saver that appears on the screen after the DVD mode has been idle for several minutes.
Press STOP or GO BACK on the remote to make the screen saver disappear from the screen and return to the DVD's main menu.
Subtitle and/or audio language is not the one selected from the initial setting
•
If the subtitle and/or audio language does not exist on the disc, the initial settings will not be seen/heard. The disc's priority
language is selected instead. Set the subtitle and/or audio language manually through the Info Display or the DVD's main menu.
Chapter 8
Chapter 8: Other Information
Graphics contained within this publication are for representation only.
Other Information
Continues on next page...
53
Advertisement
Table of Contents
