Base; Flash /Call Waiting - GE Model 21011 User Manual

B
ASE
1. Press the ringer button and the current ringer setting shows in the display.
2. Use the touch tone pad on your handset to enter 1HI , 2LOW , or 3OFF , or
use the CID (up and down arrow) to scroll to your selection.
3. Press the OK soft key to save your selection, and the ringer setting
shows in the display for two seconds then returns to standby mode.
F /C W
LASH ALL
If you subscribe to the combined Call Waiting Caller ID service from your local
telephone company, you will receive Caller ID information (if available) on Call
Waiting calls. During a phone call you will hear a beep, which indicates
another call is waiting on the line, and Caller ID information shows in the
handset display. To connect to the waiting call, press the flash button on the
handset and your original call is put on hold. You may switch back and forth
between the two calls by pressing the flash button.
TIP: Don't press the talk/callback button on the handset or the speaker/
callback button on the base to activate a custom calling service, such as call
waiting, or you'll hang up the phone.
RINGER HIGH
1 HI 2 LOW 3 OFF
OK
RINGER LOW
NEW CALL 00
MENU
AITING
EXIT
01:15 PM
DIR
29