Setting The Timer; Program Recording; Sleep Timer; Sound Features - RCA RD2056A User Manual

RS2056 EN 6/9/06 9:58 AM Page 16
Settings

Setting the Timer

EN
You can turn on/off the unit or record TUNER at
preset times by setting the timer.
1. Press and hold TIMER on the remote control
until Timer On and the clock hour flashes on
the display.
Timer
On 00:00A
2. For setting time, press or to set the
hour and then press TIMER to shift to minute
digits.
3. Press or to set the minute.
4. Press TIMER to change to Timer Off setting
with clock time flashing. Repeat steps 2 & 3
for timer off time setting.
Timer
On 00:00A
Off 00:00P
5. Press TIMER to select source. Press
to select TUNER / TUNER REC / DISC / USB.
Timer
Source
Tuner
If TUNER REC is selected, press or
select the preset station.
9
6. Press TIMER to set volume. Adjust VOLUME
CONTROL to select desired volume level.
Timer
Volume
10
7. Press TIMER to save settings.
Press TUNE MODE to quit setting.
The timer is automatically activated once
timer setting is saved
Tips:
"TUNER REC" settings are for Program
Recording. For more information, see
paragraph below.
Activating the Timer
Press and release TIMER to turn on/off the alarm.
The timer icon is displayed when timer is
activated.

Program Recording

or
Use Program Recording to preset the unit to
record your favorite radio program.
Choose TUNER REC as the source to record radio
at the preset time. Make sure the mp3 player is
connected and have enough memory space.
to
Settings

Sleep Timer

You can select the time interval in minutes before
the unit turns off automatically.
Press SLEEP to select among OFF, 120, 90, 60, 45,
30, 15 and 5 minutes.
The SLEEP icon lights on the display when sleep
timer is activated.

Sound Features

Volume Control

Rotate the volume control on the main unit or
press VOL or on the remote control to
adjust volume level. The volume level shows
briefly on the display.

Bass Boost

Press B.BOOST to turn on/off boosting the bass
frequency. The BASS BOOST icon lights on the
display when it is activated.

Muting Audio

Press on the remote to cut the sound
(Remote Only). MUTE flashes on the display.
View Remaining Sleep Time
When sleep is activated, press SLEEP once to
view remaining sleep time.
Adjust Sleep Time
Press SLEEP again when the remaining sleep time
is displayed to change sleep time.
Note:
Sleep is automatically de-activated
when the unit is turned off.

Using Preset Equalizer Curves

Press EQ to toggle among FLAT, ROCK, POP, JAZZ,
CLASSIC and CUSTOM. The display shows your
selection briefly and the relative icon lights on
the display.
Creating a Custom Curve
1. Press EQ to select CUSTOM mode.
2. While CUSTOM is displayed, press or
to cycle among displayed bass and treble
range levels.
3. While BAS and TRE is displayed, adjust volume
control to set the associated gain between
-10 - +10.
4. Press EQ to exit.
Custom
Bas +02
TRE 00
10
EN