RCA RT2350 User Manual page 21

Operating your Receiver
Retrieving preset stations
1. Press FM/AM to select tuner mode
SOURCE
FM/AM TUNING
SOURCE
2. Press MEMORY/MENU button to enter preset set-
ting mode (MEMORY icon shows on display), Press
TUNING UP/DOWN to select preset station.
AM TUNING MEMORY
OK
18
MEM
6 Channel external input (RT2600 only)
An external decoder (Dts, Dolby Digital, etc...) or a
device with built-in multi-channel decoder and 6
channel output connector (DVD player, TV...) can be
connected to the 6CH input. It is therefore possible
to play any future 6 Channels coding (SACD, DVD
Audio) thanks to this connection. The external
decoder device will send the separated audio infor-
mation to the receiver that will then amplify the sig-
nal and send to appropriate speakers.
OPTICAL 1
FL
FR
OPTICAL 2
SL
SR
RT2600 ONLY
CEN
SUB
SUBWOOFER
6 CH. EXTERNAL INPUT
PRE OUT
RT2600 ONLY
To activate 6 Channel external input, press the source
key on the receiver until 6 CH is selected or press
DVD/6 CH twice on the remote control.
SOURCE
FM/AM
SOURCE
NOTE
During 6-Channel direct input mode, TAPE OUT
and REC OUT of VCR mode will not be available.
NOTE
To enable all 6 CHANNELS in 6CH external Input
mode,make sure that when the receiver is in
DVD source, Dolby Prologic or Dolby digital/DTS
is always selected first before switching to
DVD/6 CH mode (otherwise only 2
channels/speakers will be enable in 6 CH mode).
T