RCA RT2350 User Manual page 20

Storing radio stations:
The receiver can store up to 40 radio stations in
memory. You can enter every single radio station
yourself or the receiver can store all available radio
station automatically in an ascending order.
Automatic preset storing : (FM only)
1. Select the band by pressing FM/AM
SOURCE
FM/AM TUNING MEMO
SOURCE
2- Press and hold
FM/AM on the main
unit for 3 seconds.
"MEMORY" will be dis-
played in red and will
blink during the auto-
matic storing process.
Radio frequencies will be scanned and radio station
stored automatically. When all available radio sta-
tions are stored or if all 40 memory locations are full,
the auto preset will stop.
NOTE
Weak signal can affect the "Automatic Preset
Storing function" efficiency. Adjust the antenna
for the best reception for more efficient search.
SOURCE
FM/AM TUNING MEM
SOURCE
Operating your Receiver
Manual preset
1. Select FM or AM band by pressing FM/AM
repeatedly.
SOURCE
FM/AM TUNING
SOURCE
2. Tune to the radio station to be stored. (see
"Manual tuning" on page 16 above for details)
3. Press and hold the MEMORY button on the front
panel or MENU on the remote control. "MEMORY"
will flash and a preset number will be displayed on
the display.
TUNING MEMORY
OK
4. Press TUNING
UP/DOWN, while
MEMORY is still flashing
to select the desired pre-
set memory location.
5. Press the MEMORY button on the front panel or
the remote control to store frequency in selected pre-
set location.
6. Repeat steps 1-5 to store other frequencies.
MEM
CE
FM/AM TUNING MEMORY
CE
EN
17