Table of Contents
Advertisement
Model
EVC-1122-VI
Table 6.1: Recommended high-pass filter frequencies for infrasonic protection of EVC-1122-VI systems
The recommended high-pass filter can be implemented in a stand-alone DSP loudspeaker
controller or in the processing section of a DSP-enabled amplifier. L Series and C Series
amplifiers from Dynacord are recommended for use with EVC loudspeakers because they can
also implement model-specific processing that optimizes loudspeaker performance. EVC
loudspeaker settings can also be implemented in any IRIS-Net compatible digital signal
processor.
Electro-Voice
Recommended high-pass frequency (minimum)
45 Hz, 4
-order high-pass (24dB/octave)
th
Installation manual
en
17
2018.01 | 01 | F.01U.345.997
Advertisement
Table of Contents
