Table of Contents
Advertisement
Preparing for Installation
DIRECTV PLUS™ Dish Assembly Overview
Use this page both as a parts lists for your HD satellite antenna, and a general overview of how the parts fit together;
but DO NOT ASSEMBLE THE DISH YET.
Two LNBs (Low Noise
Block converter)
LNB Adapter
LNB feeder tube
Hardware Included:
1/4" x 1-1/2" Hex Head Bolt
(Feed Tube Mounting)
#8 x 1" Phillips Head Screw
(LNB & Adapter Mounting)
1/4" x 1-3/4" Long Carriage Head Bolt
(Antenna Mounting Bolt-Painted Head)
12
Satellite dish antenna
#10 Hex Washer Head Screw
(Ground Screw )
1/4" x 7/8" Long Carriage Head Bolt
(Azimuth Clamp Bolt )
1/4" x 1/2" Long Carriage Head Bolt
(Mast Adjusting Bolts)
Antenna-to-mast bracket
1/4" External Tooth Washer
1/4" Lock Nut (ESNA Type)
1/4" Flat Washer
1/4" Hex Flange Nut
Elevation Fine
Tuning hardware
Mounting foot and mast
M6 Hex Head Self Tapping Screw
(LNB & Adapter Mounting)
(Multi-Switch Mounting)
.81 Long Spacer
(Feed Tube Mounting)
L-Bracket Fine Tuning Adjustment Tool
#8 Insert Nut
Chapter 1
Advertisement
Table of Contents
