Table of Contents
Advertisement
Chapter 6
Chapter 6
110
The Menu System
The Menu System
Mute
Turn Mute on (select Sound Off) to set the TV's volume to its minimum level
(another way to set the volume to its minimum level is to press MUTE on the
remote control).
Tone Controls
Lets you adjust the Bass, Treble and Balance. Use the right and left arrow buttons
on your remote to adjust the sliders. Increasing the bass and treble output from the
TV's internal speakers increases the low and high tones, respectively. Adjusting the
balance shifts the audio output between the left and right internal speakers.
Audio Processor
Displays a choice list of available audio modes, which control the way the sound
comes through your speakers.
To create settings:
1.
Press MENU to access the main menu.
2.
Select Audio, and then select Audio Processor. Depending on your speaker
setup, any combination of the following options will appear:
• Mono Plays the sound in monophonic audio only. This should only be used
when receiving broadcasts where distance from the broadcasters makes the
stereo signal weak. The channel banner displays the word Mono when you
tune to a program that is broadcast in mono.
Advertisement
Chapters
Table of Contents
