Installing The A/T Clutch Pressure Control Solenoid Valve A Connector; 2Nd Clutchtransmission Fluid Pressure Switch Connector - Acura TSX 2004 Removal And Installation

Fig. 74: Installing The A/T Clutch Pressure Control Solenoid Valve A Connector & 2nd Clutch
Transmission Fluid Pressure Switch Connector
57. Refill the transmission with ATF (see step 4 of DRAINING & REFILLING ).
58. Install the battery base.
59. Install the air cleaner housing and intake air duct.
60. Install the battery tray, battery, and battery cover, then secure the battery with its hold-down bracket.
61. Connect the battery terminals.
62. Set the parking brake. Start the engine, and shift the transmission through all gears three times.
63. Check the shift lever operation, A/T gear position indicator operation, and shift cable adjustment.
64. Check and adjust the front wheel alignment (see WHEEL ALIGNMENT PROCEDURES ).
65. Install the splash shield.
66. Start the engine in the P or N position, and warm it up to normal operating temperature (the radiator fan
comes on).
Wednesday, March 12, 2008 9:44:48 PM
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS Removal & Installation - TSX
Page 75