Cisco Catalyst 3850 Series Configuration Manual page 44

Creating a Sampler
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2 sampler name
Example:
Switch(config)# sampler SampleTest
Switch(config-flow-sampler)#
Step 3
description string
Example:
Switch(config-flow-sampler)# description samples
Step 4 mode {random}
Example:
Switch(config-flow-sampler)# mode random 1 out-of
1024
Step 5 end
Example:
Switch(config-flow-sampler)#
Step 6 show sampler [name]
Example:
Switch show sample SampleTest
Step 7 copy running-config startup-config
Example:
Switch# copy running-config
startup-config
What to Do Next
Apply the flow monitor to a source interface, subinterface, VLAN interface, or a VLAN.
Cisco Flexible NetFlow Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3850 Switches)
36
Purpose
Enters the global configuration mode.
Creates a sampler and enters flow sampler
configuration mode.
(Optional) Describes this flow record as a maximum
63-character string.
Defines the random sample mode.
Returns to privileged EXEC mode.
end
(Optional) Displays information about NetFlow
samplers.
(Optional) Saves your entries in the configuration
file.
Configuring Flexible NetFlow
OL-28354-01