Display Settings - Honeywell HEIPTZ-2201W-IR User Manual

Operation
 Protocol: Pelco D supported only
 Address: 0-255 adjustable, default is 1
 Baud Rate: Baud rate 9600 supported only
 Operation method: Connect analog high speed dome at the Network High Speed Dome AB port, set the
protocol and baud rate, and control the high speed dome through IPC preview interface
After all parameters setting completed, click "Save" and the it comes into effect immediately.

Display settings

Network High Speed Dome "Display settings" interface as figure 4-14.
22
Figure 4-13