Table Of Contents; Introduction; Decals And Symbols - Shindaiwa 269Ts Owner's/Operator's Manual

Introduction

This manual shows rules of safe operation,
proper use, servicing, and maintenance of your
chain saw. Follow these instructions in order to
maintain good operating condition and a long
service life. Misuse of the chain saw can cause
serious bodily injury.
It is important for you to understand all safety
precautions correctly before using your chain
saw. This chain saw is designed for cutting
wood or wood products. Do not cut solid
metal, sheet metal, plastic or any non-wood
materials. Never let children operate the saw.
If there is any clause in this manual that is
hard to be understood, please contact your
shindaiwa dealer.
Feature of this model: SURE START
Easy-To-Pull Recoil Starting System
enerates enough revolving power to rotate
crankshaft up to a speed to ignite the engine
and bring almost no kickback.
Makes engine start far easier than you ever
expect.
Contents
Introduction .................................................... 2
Decals and Symbols ....................................... 2
Rules for Safe Operation ................................ 3
eneral Precautions ....................................... 5
Kickback Safety Precautions ......................... 7
Other Safety Precautions ................................ 8
Description .................................................. 10
Assembly.......................................................11
Operation ......................................................11
Correct Use of Chain Brake ......................... 14
Cutting Instruction ....................................... 15
Service Maintenance uide ......................... 18
Trouble Shooting ......................................... 18
Service .......................................................... 19
Saw Chain Maintenance .............................. 21
Storage ......................................................... 22
Disposal Procedure ...................................... 22
Speci cations ............................................... 23
Declaration of Conformity ........................... 24
2

Decals and Symbols

This symbol accompanied by the word
"DANGER" calls attentions to an act or
a condition which will lead to serious
personal injury or death of operators
and bystanders.
This symbol accompanied by the word
"WARNING" calls attentions to an act
or a condition which can lead to serious
personal injury or death of operators
and bystanders.
TM
Carefully read the operator's
manual.
This chainsaw is for trained
tree service operators only.
One handed operation of the
saw can be dangerous.
Wear eyes, ears and head
protection.
Page
Use appropriate protection for
foot-leg and hand-arm.
Warning!
Kickback may occur!
Emergency stop
Chain brake operation
Manufacturer
YAMABIKO CORPORATION
7-2 SUEHIROCHO 1-CHOME, OHME, TOKYO 198-8760, JAPAN
Authorized Representative in Europe
Atlantic Bridge Limited
Atlantic House, PO Box 4800, Earley, Reading R 5 4 B, United Kingdom
DANGER
WARNING
CAUTION
"CAUTION" indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
Circle and slash symbol
means whatever is shown
is prohibited.
Note
This enclosed message provide tips for use,
care and maintenance of the unit.
Oil and petrol mixture
Chain oil ll oil pump
Chain oiler adjustment
Purge bulb (Primer)
Carburetor adjustment
- Low speed mixture
Carburetor adjustment
- High speed mixture
Carburetor adjustment
- Idle speed
Recommended maximum
speed
uaranteed sound power level