Blind Spot Monitoring System - Mazda CX-3 Smart Start Manual

B LI ND SP OT M ON I TOR I N G SYST E M
BLIND SPOT MONITORING (BSM)
The BSM system is designed to assist the driver by monitoring blind spots on the left
and right sides of the vehicle in certain situations, such as lane changes.
WARNING:
BSM is only a
supplementary
system to help
aid in monitoring
blind spots;
however, BSM
has limitations.
The system may
not detect all
vehicles, especially
a motorcycle. Do
not rely solely on
the BSM. Relying
solely on the
BSM may cause
an unexpected
accident resulting
in death or serious
injury. Make sure
to look over your
shoulder before
changing lanes.
NOTE:
• The BSM can assist the driver in confirming the safety
of the surroundings, but is not a complete substitute.
• The driver is responsible for ensuring safe lane changes
and other maneuvers.
• Always pay attention to the direction in which the vehicle
is traveling and the vehicle's surroundings.
Turning BSM System Off:
Turning the BSM system off will turn off both the light and
sound indicators. To turn the BSM system off, push the BSM OFF switch on the dash.
The BSM OFF indicator in the instrument cluster will turn on to indicate the BSM system is off.
NOTE:
Turning the BSM system off will also turn off the Rear Cross Traffic Alert system.
28
MAZDAUSA.COM
• The BSM detects vehicles approaching from the rear while traveling in
the forward direction at a speed of 6.3 mph or more and notifies the
driver by turning on the BSM warning indicator light and displaying
the vehicle detection screen (vehicles with Active Driving Display).
• If the turn signal lever is operated to signal a turn in the direction
in which the BSM warning indicator light is illuminated while the
approaching vehicle is detected, the
BSM warns the driver by turning on
the BSM warning indicator light, and
by activating the warning sound and
the warning screen indicator display
(vehicles with Active Driving Display).
• The detection area on this system
covers the driving lanes on both sides
of the vehicle and from the rear part
of the front doors to about 164 ft
behind the vehicle.
• BSM sensors are located under the
left and right rear bumper areas.
The BSM system may not operate
properly if the rear bumper is dirty,
so keep the rear bumper area clean
and free of bumper stickers.
ACTIVE DRIVING DISPLAY
Vehicle
Detected
WHITE
Vehicle
Detected
with Turn
AMBER
Signal On
Your
vehicle
Detection areas
BSM switch