Dram Voltage - ASROCK X470 Taichi User Manual

DRAM Voltage

Use this to select DRAM Voltage. The default value is [Auto].
VTT_DDR
Configure the VTT DDR voltage. The default value is [Auto].
VPPM
Configure the voltage for the VPPM.
2.50V_PROM Voltage
Configure the voltage for the 2.50V PROM.
+1.8 Voltage
Use this to select +1.8 Voltage. The default value is [Auto].
VDDP
Configure the voltage for the VDDP.
1.05V_PROM Voltage
Use this to select 1.05V_PROM Voltage. The default value is [Auto].
Save User Default
Type a profile name and press enter to save your settings as user default.
Load User Default
Load previously saved user defaults.
Save User UEFI Setup Profile to Disk
Save current UEFI settings as an user default profile to disk.
Load User UEFI Setup Profile to Disk
Load previously saved user defaults from the disk.
70