Before Straightening; Changing The Ceramic Plates; Selecting The Correct Ceramic Plates; Removing The Ceramic Plates - Balance KH 5525 Instruction Manual

Before straightening

• The hair should be clean, dry and free of styling
products.
• Comb the hair thoroughly before straightening
so that there are no knots in it.
• To achieve an especially good straightening result,
spread special products for hair straightening
through the hair.
• Divide the hair into manageable portions and
secure the upper portions to the head with grips
so that they do not get in the way.
Changing the ceramic
plates

Selecting the correct ceramic plates

Select the ceramic plate suitable for the task:
• Narrow ceramic plates
For styling and structuring medium length to
short strands and fringes.
• Wide ceramic plates
For straightening wider hair strands.
Note:
NEVER use diverse sized ceramic plates at
the same time. Risk of burns!
Attention!
In all cases the ceramic plates
be cooled down before they are exchanged.
Risk of burns!

Removing the ceramic plates

1.
Remove the power plug
2. Grasp the ceramic plate
the upper end. Pull it out of its guide rail.
3. Use the same procedure with the second cera-
mic plate / .
t y
t :
y :
t / y MUST
e from the wall socket.
/ on the side at
t y

Fitting the ceramic plates

1.
Slide the selected ceramic plate
open side at the front in the guide rail on the
hair straightener until it audibly engages.
2.
Use the same procedure with the second cera-
mic plate /
t

Heating-up times

The given heating-up times are guiding figures. They
can vary, subject to other influences.
Heat levels Temperature
Heating
150°C
level 1
Heating
160°C
level 5
Heating
170°C
level 10
Heating
180°C
level 15
Heating
190°C
level 20
Heating
200°C
level 25
- 4 -
t / y
.
y
Heating-up time, Heating-up time,
narrow ceramic wide ceramic
plates
2 min.
2 min. 15 sec. 3 min. 15 sec.
2 min. 30 sec. 3 min. 30 sec.
3 min.
3 min. 30 sec. 4 min. 30 sec.
4 min.
with the
plates
3 min.
4 min.
5 min.