Troubleshooting Loose Connections - Cisco ASA 5585-X Maintenance Manual

Chapter 4 Maintenance and Upgrade Procedures

Troubleshooting Loose Connections

Perform the following actions to troubleshoot loose connections on adaptive security appliances:
•
•
•
•
•
•
•
OL-22567-02
Make sure all power cords are securely connected.
Make sure all cables are properly aligned and securely connected for all external and
internal components.
Remove and check all data and power cables for damage. Make sure no cables have bent pins or
damaged connectors.
Make sure each connector is properly seated.
If a device has latches, make sure they are completely closed and locked.
Check any interlock or interconnect indicators that indicate a component is not connected properly.
If problems continue, remove and re-install each connector, checking the connectors and sockets for
bent pins or other damage.
Cisco ASA 5585-X Adaptive Security Appliance Hardware Installation Guide
Troubleshooting Loose Connections
4-43