Advanced Operation; Dsp; Play Modes; Programming Tracks - RCA RD1020 User Manual

RD1020/1070 IB-EN 11/6/02 3:40 PM
General Operation

DSP

• Press repeatedly to select among the
DSP modes:
FLAT > BASS > POP > ROCK > JAZZ

Play modes

• Press MODE repeatedly during play-
back to switch among the following
playback modes:
Normal playback > Repeat All >
Random > Random repeat > Program
> Repeat program > Normal play-
back
Note: Program and Repeat pro-
gram will only appears if there are
programmed tracks.
7
Page 14

Programming Tracks

1. Press and hold MODE for 2 seconds in
stop mode to enter program mode. You
will see 'P' icon lit representing program
mode, flashing ' - -' for track selection
and 'P01' for program list position.
2. Press Skip backward or Skip for-
ward to select a track. Selected track
number will flash.
Note: The player will enter Intro Play
mode and play the beginning of each
track as you scroll through tracks for
programming .
3. Press MODE to confirm selection.
4. Press MODE again to skip to the next
programming position.
5. Repeat steps 2-4 for further selections.
Maximum 20 selections can be made.
6. Press STOP to exit programming
mode or unit returns to stop mode auto-
matically after 30 seconds if there is no
key activation.
See section on "Play Modes" to playback
programmed tracks.

Advanced Operation

Editing program

File Download

When the unit is connected to the com-
Overwriting Programmed Tracks
puter,
1. In stop mode, press and hold MODE
screen.
to enter program mode.
During transfer, the icon will flash.
When the transfer is complete, the icon
2. Press MODE to select the pro-
will remain lit. Do not unplug the USB
grammed track you want to overwrite.
cable when the icon is flashing.
3. Press Skip backward or Skip for-
NOTE:
ward to select the new track you want
See Software Instruction Manual for
to store.
instructions to install USB driver , music
management software and to transfer
4. Press MODE to confirm selection.
tracks to player and/or memory card.
5. Repeat steps 2 and 3 to overwrite
additional programmed tracks.
Deleting Programmed Tracks
1. In stop mode, press and hold MODE
to enter program mode.
2. Press MODE to select the pro-
grammed track to be deleted.
3. Press and hold DSP for about 3 sec-
onds to delete unwanted track from
your program list, ' - - ' will show on dis-
play to indicate successful deletion.
4. Repeat steps 2 and 3 to delete addi-
tional tracks from the program list.
5. To cancel editing program, press
STOP once , or unit will return to stop
mode automatically after 30 seconds if
there is no key activation.
EN
will be displayed on the
8