Foreword; Product Profile; Lcd; Scanning Frequencies - Philips 150S8FB/00 Service Manual

1. FOREWORD

This specification describes a 15" wide multi-scan color TFT LCD monitor with max. resolution up to 1024*768/75 Hz
non-interlaced. All optical characteristics (including WHITE-D, Brightness, and so on) are determined according to
panel specification after warming up approximate 30 minutes that brightness stability is optimal, and follow strictly
after panel specification.

2. PRODUCT PROFILE

This display monitor unit is a color display monitor enclosed in PHILIPS global styling cabinet, which has an
integrated tilt base.

2.1 LCD

Type NR.
Outside dimensions
Pitch (mm)
Color pixel arrangement
Display surface
Color depth
Backlight
Active area (WxH)
View angle
Contrast ratio
White luminance
Gate IC
Source IC
Response time

2.2 Scanning frequencies

Hor.
Ver.
Video dot rate
Power input
Power consumption
Functions:
（1）D-SUB: analog R/G/B separate inputs, H/V sync separated, Composite (H+V) TTL level, SOG sync
（2）DVI_A: NA
（3）DVI_D: NA
2.3 Ambient temperature:

3. Electrical characteristics

3.1 Interface signals

1). D-Sub Analog
Input signal : Video, Hsync., Vsync
Video : 0.7 Vp-p, input impedance, 75 ohm @DC
Sync. : Separate sync
Hsync Positive/Negative
Vsync Positive/Negative
: LM150X8-TLC1 (LPL),
: 326.5(w)∗253.5(h)∗11.2(d) (Typ) mm
: 0.297 x 0.297mm
: RGB vertical stripes
: low reflection, antiglare with hard coating
: 16.7M colors (6 bits)
: 2 CCFL's
: 15" diagonal
: R/L 90, U/D 50(Typ.) (CR>10)
: 550:1(Typ.) 350:1(Min.)
: 170 cd/m2 (Typ.)
: OKI
: OKI
: 8ms
: 30 – 63 KHz
: 56 - 76Hz
: 80MHz
: 90-264 V AC, 50/60 ± 2 Hz
: 23W maximum, 17W (typ.)
0 °C - 35 °C
TTL level , input impedance 2.2k ohm terminate
HUDSON 8 91