Connecting To The Pc - Philips 150S8FB/00 Service Manual

HUDSON 8
12

3.4 Connecting to the PC

1) Connect the power cord to the back of the monitor firmly. (Philips has pre-connected)
VGA cable for the first installation.
2) Connect to PC
(a) Turn off your computer and unplug its power cable.
(b) Connect the monitor signal cable to the video connector on the back of your computer.
(c) Plug the power cord of your computer and your monitor into a nearby outlet.
(d) Turn on your computer and monitor. If the monitor displays an image, installation is complete.