Cvf Adjustment; How To Select The Cvf Adjust Mode - Samsung VP-A12 Service Manual

5-2-4 CVF Adjustment

5-2-4 (a) PREPARATION
Note 1 : EVR built-in EEPROM is used for CVF adjustment.

1. How to select the CVF adjust mode.

1) Connect the power source and then set the power conversion switch to VCR mode.
2) Press the ÒSTILLÓ and push the ÒTAPE EJECTÓ button on the unit towards arrow for more than about
3 seconds to set to the adjust mode.
SET
(TOP VIEW)
REMOTE CONTROL
Remote for camcorder
adjust for jig (Part No. : AD59-10379A).
START
/STOP
REW
PLAY
STOP
STILL
Note : In service adjustment mode, button names are different from those in customer CVF function control
mode. EX) ÒDISPLAYÓ button is the same as ÒCONFIRMÓ.
Samsung Electronics
STILL BUTTON
F.F
DISPLAY
SELF TIMER
TAPE EJECT BUTTON
Reassignment is the
adjustment mode.
Alignment and adjustment
(RIGHT VIEW)
Button placement when remote is
used for service adjustment.
DATA
UP
ADDRESS
MOVE
CONFIRM
DATA
DOWN
5-15