Chapter 3 Connecting The Cisco Ucs Invicta C3124Sa Appliance To The Network; Factory Default Ip Settings - Cisco UCS Invicta C3124SA Installation Manual

Connecting the Cisco UCS Invicta C3124SA
Appliance to the Network
•
•
•
•
This section provides the steps for connecting to the Cisco UCS Management Interface.
Before connecting to the network ensure you have the following customer-supplied items:
•
•

Factory Default IP Settings

The factory default settings must be changed to match the local subnet. The default settings are provided
for informational purposes only:
•
•
The Default Gateway or DNS must be customer configured.
Firewall must be configured to allow access to Port 443 outbound. This enables your device to send a
Note
nightly health status to Cisco Autosupport.
OL-31369-01
Completing Console Screens, page 3-2
Configuring Network Settings, page 3-3
Changing the Console Password, page 3-5
Basic Troubleshooting, page 3-5
Network cables
Network Configuration Information:
IP Addresses
–
Subnet Mask
–
– Default Gateway
Bond0: 192.168.10.1
Netmask: 255.255.255.0
C H A P T E R
Cisco UCS Invicta C3124SA Appliance Installation Guide
3
3-1