Cisco Ucs Invicta C3124Sa Appliance Upgrade Process - Cisco UCS Invicta C3124SA Upgrade Procedure

Cisco UCS Invicta C3124SA Appliance Upgrade Process

During the HUU upgrade process, a network connection termination message appears after 10 minutes
Note
because of the CIMC reset. It is best to have a continuous ping to the CIMC IP address. At this point, go
back to CIMC and relaunch the KVM Console.
Figure 8
Note When the BIOS is the component to be upgraded, the system will reset at the end of the process. The
connection to the KVM Console will be lost. The system will reboot automatically. This process takes
approximately 10 minutes. It is best to have a continuous ping to the CIMC IP address.
When the upgrade process is complete, CIMC will reflect the new 2.(3i) version.
Figure 9
Should you encounter any error or issue during the upgrade process, contact technical support before
Caution
trying to uninstall the upgrade. Attempting to uninstall the upgrade could potentially cause data integrity
and/or performance issues.
Cisco UCS Invicta C3124SA Appliance Upgrade Process
Log into the Cisco UCS Invicta C3124SA Appliance.
Step 1
Cisco UCS Invicta C3124SA Appliance Upgrade Procedure Guide
6
HUU Error Message
New CIMC Version Number