Honda BF40D Owner's Manual page 72

STARTING THE ENGINE
6 × 25 mm BOLTS
Remove the
harness.
3. Remove the four 6 25 mm bolts
×
and clamp bracket, then remove the
ACG cover.
4. Install the band clamp, harness and
the clamp bracket with the 6
25 mm bolt.
Take care not to lose the bolts.
70
(H type)
CLAMP
BRACKET
SHIFT
Remove
LEVER
the band
clamp.
ACG
COVER
5. Set the shift lever or remote control lever is in the NEUTRAL position.
The ''Neutral Starting System'' will not work in emergency starting.
Be sure to set the shift lever/control lever into the NEUTRAL position to
prevent start-in-gear when starting the engine in emergency. Sudden
×
unexpected acceleration could result in serious injury or death.
NEUTRAL
REMOTE CONTROL LEVER
NEUTRAL
(R1 type)
NEUTRAL
NEUTRAL