Installing the base cover
1
Toe in the base cover front edge into the system.
2
Press the edges of the cover until it clicks into place.
3
Replace the M2.5x7.5 screws to secure the base cover to the system.
4
Install the
microSD
card.
5
Follow the procedure in
Battery
Removing the battery
1
Follow the procedure in
2
Remove the:
a
microSD card
b
base cover
3
To remove the battery:
a
Remove the single (M2x3) screw and lift the right metal bracket that secures the battery cable to the system board [1, 2].
b Peel the adhesive tape that secures the keyboard cable in place [3].
c
Disconnect the keyboard cable from the connector in the system board [4].
12
Removing and installing components
After working inside your
computer.
Before working inside your
computer.