Advertisement
Steps
8.Remove suction pipe and discharge pipe
Discharge the refrigerant completely;
unsolder the pipes connecting the compressor
and the condenser assy, and then remove the
suction pipe and the discharge pipe.
(NOTE: Before unsoldering, please discharge
the refrigerant completely.)
9. Remove compressor
Remove the 3 foot nuts fixing the compressor
and then remove the compressor.
10. Remove condenser sub-assy
1
Remove the screws connecting the support
(condenser) and condenser assy,and then
remove the support(condenser).
Procedure
support
discharge pipe
suction pipe
compressor
Advertisement
