Sprint PROTEGÉ 616 User Manual page 7

Clear key
Press the Clear key to cancel any task you are in the middle of performing, and
to terminate a call. Also use this key to conclude programming certain features.
However, do not press the Clear key to complete a programming task if you
are active on a call, as this will also disconnect you from your call.
Dial pad
Use the dial pad to dial telephone numbers, and to enter alphabetical letters for
messages.
Display (LCD)
The LCD displays time, day, and date. It provides information on the status of
your keyset, and prompts you when you are setting and canceling features.
While you are on an outside call, the LCD will display a call duration timer.
Messages on the display receive the following priority:
1. Database/Feature programming
2. Call Wait Notification
3. Alarm Clock Invoked
4. Current Operation
5. Recall, Transfer, Incoming,
Camp On Line Signaling
6. ICM Call Signaling
Display in an idle state
MONTH
EXT. OR USER NAME
Feature keys
These keys and their associated LEDs (Light Emitting Diode) give you speedy
access to outside lines, internal resources such as extensions and extension
groups, frequently used features, and speed dial numbers.
Each key can be one of the following:
N An outside line key. Allows direct access to a line or group of lines.
N A Direct Station Selection (DSS) key. Directly calls a specific internal
resource, such as a specific keyset, hunt group, paging group or voice
mail general number, instead of dialing manually.
N A feature key. Pressing one key activates or deactivates features such as
Protegé 616 Keyset User's Guide - with display
®
7. Message Waiting Invoking
8. Call Again Invoking
9. DND/CFW Indication
10. Advisory Message
11. Time, Date & Advisory Mode
DATE DAY
1 / Introduction
TIME
EXT. #
3