Specifications - NAD M12 Service Manual

DIGITAL INPUT (COAXIAL, OPTICAL, USB)
Rated Distortion (THD+N with AES 17 filter)
IMD Distortion
Input Impedance
Sample Rate
Frequency Response
Channel Separation
Signal / Noise Ratio
Output Level
INPUTS/OUTPUTS
XLR - AES/EBU
S/PDIF
USB Class 2 Audio: asynchronous 24/192 support
DD AP-1 Analogue Phono Module
IR In
Trigger In
Trigger Out
GENERAL
Idle Power
Standby Power
Unit Dimensions (WxHxD) - Gross*
Net Weight
Shipping Weight
* Gross dimensions include feet, extended buttons and rear panel terminals.
** Non-metric measurements are approximate. NAD Electronics will not assume any liability for errors being made by retailers, custom installers, cabinet
makers, or other end users based on information contained in this document.
Note: Installers should allow a minimum clearance of 55mm for wire/cable management.

SPECIFICATIONS

<0.0005% (0dBFS)
0.0001%
75 ohms (coaxial)
110 ohms (AES/EBU)
32kHz to 192kHz (USB and digital S/PDIF)
±0.5dB (ref. 20Hz-22kHz @ sample rate )
>-115dB (ref. 0dBFS Volume -1dB)
>-125dB (ref. 0dBFS 2V out)
2V (ref. input 0dBFS)
Coaxial x 2
Optical x 2
12V ±20%
12V ±20%
26W
<0.5W
435 x 133 x 383mm
17 1/8 x 5 1/4 x 15 1/8 inches**
8.1kg (17.9lb)
14.5kg (32.0lb)
5
M12