Chapter 2: Using The Remote Control; Button Descriptions For Tv Mode; Button Descriptions For Dvd And Vcr Modes - RCA LCDS2022B User Manual

Chapter 2: Using the Remote Control

Indicator
DVD
VCR
VOL
MUTE GO BACK
CLEAR
OK OK
PRESETS
CC
GUIDE
1
4
7
INPUT
REVERSE PLAY
RECORD STOP
AGAIN ZOOM
SPEED SEARCH
Tip
To turn off most RCA, GE, and Proscan
components that are connected to the TV, press
ON•OFF twice within two seconds.
This feature only works with most RCA, GE, and
Proscan products.
Chapter 2

Button Descriptions for TV Mode

Arrows Used to highlight different items in the TV menu and to
adjust the menu controls.
ON OFF
Indicator Indicates the programming mode when programming the
TV remote to control components. Lights when you press a valid button
on the remote. Flickers when a button is pressed and the batteries are
low.
(0-9) Number Buttons Enter channel numbers and password
CH
settings directly through the remote control.
To enter a one-digit channel, enter a zero first. To enter a two-digit
channel, press the two digits and expect a few seconds delay. This is if
you want to enter a third digit.
MENU
CC Brings up the Closed Caption menu.
CH + or CH - Scans up or down through the current channel list.
Press once to change the channel up or down; press and hold to
SKIP
continue changing channels.
INFO
CLEAR Removes any menu or display from the screen and returns
2 3
you to normal viewing.
GO BACK Returns you to the previous channel.
5 6
INFO Brings up the channel banner; press again to clear the screen.
8 9
INPUT Toggles through the available input sources (VID1, VID2-
ANTENNA
0
YPbPr/VID2-PC and current channel).
MENU Brings up the Main menu.
FORWARD
MUTE Reduces the TV's volume to its minimum level. Press again to
PAUSE
restore the volume.
OPEN CLOSE
OK When in the menu system, selects highlighted items.
ON•OFF When in TV mode, turns the TV on or off. If in another
mode (VCR or DVD) and programmed, will turn the component on or
off.
PRESETS Resets the picture settings to factory default for the video
input channel you're currently tuned to.
SKIP Press once before changing channels and the TV will wait 30
seconds before returning to the original channel. Press repeatedly to
add more time.
TV Turns on the TV and puts the remote in TV mode. Also displays
current status.
VOL – or VOL + Decreases or increases the TV's volume.
Button Descriptions for DVD and
VCR Modes
AGAIN In DVD mode, replays the last several seconds of the title
you're playing.
ANTENNA In VCR mode, functions as a TV/VCR button.
Graphics contained within this publication are for representation only.
11