Disassembly - JVC SX-DW303 Service Manual

www.freeservicemanuals.info
3.1 Removing the amplifier assembly
(See Figs.1 and 2)
(1) Remove the eleven screws A attaching the amplifier as-
sembly. (See Fig.1.)
(2) Remove the amplifier assembly from the service cabinet.
(See Fig.2.)
(3) From the back side of the amplifier assembly, disconnect
the wire from the wire connector. (See Fig.2.)
(4) Disconnect the speaker wire from the speaker terminal.
(See Fig.2.)
A
Service cabinet
3.2 Removing the back panel
(See Fig.3)
• Prior to performing the following procedures, remove the am-
plifier assembly.
(1) Pull out the volume knob and frequency knob.
(2) Remove the seven screws B attaching the back panel.
1-6 (No.MB082)
SECTION 3

DISASSEMBLY

Amplifier assembly
A
A
Fig.1
Service cabinet
Amplifier assembly
Wire connecter
Fig.2
Volume knob
Amplifier assembly
B
Fig.3
Absolutly Free manuals
Speaker terminal
Frequency knob
B
Back panel