Draytek Vigor2926L User Manual page 724

-t n
-i <ip address>
-w <ip address>
-n <netmask>
-g <gateway>
-s <server ip>
-A <idx>
-B <mode>
-V
-C <sim pin code>
-O <init string>
-T <init string2>
-D <dial string>
-v <service name>
-m <ppp username>
-o <ppp password>
-e n
-q n
-x n
-y n
-z n
-Q <mode>
-I <ping ip>
708
n=0: PAP/CHAP (this is default setting)
n=1: PAP Only
It means to set connection duration and n means different
conditions.
n=-1: Always-on
n=1 ~ 999: Idle time for offline (default 180 seconds)
It means that PPPoE server will assign an IP address specified here
for CPE (PPPoE client).
If you type 0.0.0.0 as the <ip address>, ISP will assign suitable IP
address for you. However, if you type an IP address here, the router
will use that one as a fixed IP.
It means to assign WAN IP address for such connection. Please type
an IP address here for WAN port.
It means to assign netmask for WAN connection. You have to type
255.255.255.xxx (x is changeable) as the netmask for WAN port.
It means to assign gateway IP for such WAN connection.
It means to set PPTP/L2TP Server IP.
<server ip>= ppp.qqq.rrr.sss: PPTP/L2TP server IP
Set to Always On mode, and <idx> as backup WAN#.
Set to Backup mode.
<mode> 0: When any WAN disconnect; 1: When all WAN disconnect.
It means to view Internet Access profile.
Set (PPP mode) SIM PIN code (max. 15 characters) for 3G/4G USB
Modem.
Set (PPP mode) Modem Initial String (max. 47 characters) for 3G/4G
USB Modem.
Set (PPP mode) Modem Initial String2 (max. 47 characters) for
3G/4G USB Modem.
Set (PPP mode) Modem Dial String (max. 31 characters) for 3G/4G
USB Modem.
Set (PPP mode) Service Name (max. 23 characters) for 3G/4G USB
Modem.
Set (PPP mode) PPP Username (max. 63 characters) for 3G/4G USB
Modem.
Set (PPP mode) PPP Password (max. 62 characters) for 3G/4G USB
Modem.
Set (PPP mode) PPP Authentication Type for 3G/4G USB Modem.
n= 0: PAP/CHAP (default),
1: PAP Only
(PPP mode) Index(1-15) in Schedule Setup-One
(PPP mode) Index(1-15) in Schedule Setup-Two
(PPP mode) Index(1-15) in Schedule Setup-Three
(PPP mode) Index(1-15) in Schedule Setup-Four
Set (PPP mode or DHCP mode) WAN Connection Detection Mode.
<mode>
0: ARP Detect;
1: Ping Detect
Set (PPP mode or DHCP mode) WAN Connection Detection Ping IP.
<ping ip>= ppp.qqq.rrr.sss: WAN Connection Detection Ping IP
Vigor2926 Series User's Guide