Draytek Vigor2926L User Manual page 597

Item
Switch Name
Comment
Copy configuration
from
Login Password
IP Address
Save
Cancel
Send to Device
2. After finished the settings, click VLAN tab to open following page.
Blank page due to LAN>>VLAN not configured previously:
Vigor2926 Series User's Guide
Description
Type a name for the Switch. The purpose of name is used for
identification.
It is useful when there are many VigorSwitch (same modes)
devices connecting to Vigor2926 seres.
Type the text in such field if additional explanation for the
switch is required.
Check the box to copy configuration from other device. Use
the drop down list to choose the one you need.
Note, if there is only one VigorSwitch connected and
managed by Vigor2926 series, then such field is unavailable.
Display the original login password for the VigorSwitch.
However, if Group Password (in Central Management
>>Switch>>Group) is configured with other string, then such
field is not allowed to type any other password. And only the
group password will be shown, instead.
Display the dynamic IP address (of the connected switch)
assigned by Vigor2926.
Click it to save the settings.
Click it to return to previous web page without saving the
setting changes.
Click it to transfer the configuration change (e.g, login
password, switch name, etc.) to the VigorSwitch
immediately.
581