Farberware 103742 Use And Care Manual page 10

NOTE: hI, MED, LO programs are changeable during operation and total operation
time is about 60 sec. Press
during operation.
DRINK CUP program is independent with others. Press other function keys will not
affect its operation. Only press
NOTE: This is appliance is featured with the perfect blend technology. The appliance
is programmed to change speeds during operation. The change of speeds allows
the food to drop toward the blades giving an improved performance.
• Press the button representing the required function then the
is steady blue. Once the operation cycle has finished the
flashing again.
• For drink cup operation use the
function buttons may damage the appliance.
• To stop an operation cycle prematurely, press the
NOTE: When using the jar (12), it is possible to add additional food during the
operation cycle by removing the measuring cup (14) from the jar lid (13) (ill.
NOTE: Do not hold drink cup during operation. When blending heavy loads using
the drink cup, the appliance may turn slightly. If desired the appliance can be
stabilized by holding the left side of the base.
• Disconnect the plug
• When too much food is placed in the blender, the load can exceed its rated
power and preventing blade from turning. When this occurs the appliance will
stop working within a few seconds and the
If this occurs, press the
of the load. Turn appliance on and press desired speed.
• If the appliance is operated with heavy loads for long period of time or multiple
cycles, it will turn off to protect from overheating. The appliance will stop and
button (20) light starts flashing. Press the
the
appliance and unplug from wall outlet. Wait at least 10 to 15 minutes before
plugging appliance back in for normal operation.
Blender_103742_IM_US_V5_121214.indd 10
OPERATION
button (20) or PULSE button (15) to finish the program
button (20) to finish the program.
DRINK CUP button (18) only. Use of other
(6) from the wall outlet (ill.
button (20) to switch off the appliance. Remove some
10
button (20)
button (20) starts
button (20).
k ).
button (20) light starts flashing.
button (20) to switch off the
).
g
12/14/12 9:55:15 AM
S
•
•
•
•
S
•
•
•
•