Using The Fingerprint Reader - Lenovo Tablet 10 User Manual

2. Install a new microSD card into the tray with the metal contacts facing downward
the nano-SIM-card and microSD card slot until you hear a click
installed in correct orientation.

Using the fingerprint reader

Depending on the model, your computer might have a fingerprint reader. With fingerprint authentication, you
can log in to your computer by taping your fingerprints instead of entering the password.
Enrolling your fingerprints
To enable fingerprint authentication, enroll your fingerprints first by doing the following:
Note: It is recommended that you enroll more than one fingerprint in case of any injuries to your fingers.
1. Open the Start menu
2. Follow the instructions on the screen to enroll your fingerprint.
When you scan your finger over the fingerprint reader, note the following:
1. Tap the fingerprint reader with the top joint of your finger and hold your finger there for one or two
seconds with a little pressure.
2. Lift your finger to complete one scan.
Tips on using the fingerprint reader
• The following actions could damage the fingerprint reader or cause it to malfunction:
– Scratching the surface of the reader with a hard and pointed object
– Scraping the surface of the reader with your fingernail or anything hard
– Using or touching the reader with a dirty finger
, then tap Settings ➙ Accounts ➙ Sign-in options.
3 . Insert the tray into
4
. Ensure that the new microSD card is
.
Chapter 3 Using your computer
15