Why You Should Connect The G-Link Cable; How To Find The Remote Sensor; Placing The G-Link Wands - RCA HD50LPW167 User Manual

Why You Should Connect the G-LINK Cable

The supplied G-LINK cable enables the TV Guide On Screen system (the on-screen interactive
program guide) to work with your VCR and/or cable box.
Cable Box – If your TV is connected to a cable box, you must connect the G-LINK cable to
receive TV program listings for your area and to tune directly to a channel when the TV Guide
On Screen system is on.
VCR – If your TV is connected to a VCR and you don't connect the G-LINK cable, one-touch
VCR recording and timed recordings won't work. The other features of the TV Guide On Screen
system will work properly.
G-LINK cable
G-LINK wands
Tips
If you have both a VCR
and a cable box, it
doesn't matter which
wand is connected to
which box.
If you don't have both
a cable box and a VCR
connected to your TV, just
coil the cable of the extra
G-LINK wand with a twist
tie and leave it behind
the TV.
Chapter 1

How to Find the Remote Sensor

You have to place the G-LINK wands in front of the remote sensor on the VCR and/or cable
box. Some cable boxes and VCRs have the remote sensor labeled on the unit. If the remote
sensor isn't labeled on your VCR and/or cable box, you need to use the remote control that
came with the VCR and/or cable box to locate the sensor.
1. Turn off the VCR and/or cable box.
2. Hold the remote control (not the one that came with your TV, but the one that came
with the cable box and/or VCR to which you're attaching the G-LINK cable) so that it is
touching the front of the device.
3. Slowly move the remote control across the front of the device (VCR or cable box) while
you continually press the power button. You must press and release the power button
each time you move the remote (holding down the button won't work).
VCR
4. When the device turns on, you've located the VCR's or cable box's remote sensor.

Placing the G-LINK Wands

Place the G-LINK wands in front of the remote sensor on your VCR and/or cable box
approximately one inch away from the remote sensor (see below).
SENSOR
Connections & Setup
CABLE BOX
COMPOSITE INPUT
COMPONENT (1080i/720p/480p/480i)/COMPOSITE INPUTS
INPUT 1 INPUT 2
VIDEO Y/VIDEO L
DIGITAL
L P R
B
AUDIO
OUTPUT
(OPTICAL)
G-LINK
R P S-VIDEO
R
Connect to G-LINK jack
on the back of the TV
VCR
CHANNEL
03
AUDIO/VIDEO FIXED/VARIABLE
OUTPUT AUDIO OUTPUT
INPUT 3
CABLE INPUT
Y/VIDEO L VIDEO SUBWOOFER
P R
B L L
P S-VIDEO
R R R
TV (back panel)
CHANNEL
SENSOR
03
19