Sony PXW-FS7 Manual page 32

CineEI Mode
This mode captures everything the camera can see. When viewed on a normal monitor the images
look flat and washed out. All images shot using CineEI will need to be graded in post.
When changing the base setting to go from custom to CineEI (page 9) you will also need to set the
colour space as well (page 10).
Monitoring and Viewing S-Log 2/3
To make life easier when shooting with S-Log 2/3 use a monitor look up table (MLUT)
To set the MLUT to in to Menu > monitor LUT > SDI 2 (IMPORTANT leave MLUT off SDI 1 and
internal recording). Use the Rec709(800) gamma curve MLUT it converts the image to standard TV
gamma so that if the image looks right it is right.
This makes exposing your images easy as you can see a true image but still recording in S-Log.
You would do everything as you would be using the LUT as you would with S-Log.
To set the Rec709 MLUT Menu > Video > Monitor LUT > Viewfinder > On
LUT select P1: 709(800%) standard TV. Zebra's not effected use as normal can use 70% or 90%.
October 2016 v4
SDI 2 > On
HDMI > On
32