Connecting To Your Wireless Network - Dell TrueMobile 1300 User Manual

Getting Started with your Dell TrueMobile 1300 Wireless USB Adapter: Dell TrueMo...
b. Connect the other end of the USB cable to any USB connector on the back of your
desktop computer as shown in Figure 2.
c. The Found New Hardware screen will appear.
d. The driver for your device will be automatically detected and installed.
e. Check for the Green Light on the device to make sure the USB cable is connected
between the device and the system correctly.
f. The New network device installed screen will appear on the bottom right corner. Click X
to close the message. (XP only)
Back to Top

3. Connecting to Your Wireless Network

To connect to the wireless network, the wireless network name (SSID) of the wireless USB
adapter must match the wireless network name specified by your Wireless Broadband Router*.
To set the network name, follow the instructions below for Windows XP operating system. For
Windows 2000, follow instructions under section 3.2.
3.1 Connecting using Windows® XP Operating System
a. Click on the Wireless Network Connection pop up message on the
bottom right corner.
file://C:\Documents%20and%20Settings\dsarired\My%20Documents\projects%20200...
Figure 1
Figure 2
Page 2 of 4
30-9-2003