Safety System Tests - Briggs & Stratton 1696614-00 Operator's Manual

1
B
A Chute Danger
Decal
(P/N 1737865)
B Auger Danger
Decal (large-
frame models)
(P/N 1737866)
8

Safety System Tests

Amputation hazard
This snowthrower is equipped with several mechanical
safety systems designed to keep the operator safe while
using the unit. Check the operation of these systems regu-
larly using the safety system tests listed. If the unit fails to
A
operate as described, DO NOT operate it. See your autho-
rized dealer for service immediately.
Test 1 - Auger/Impeller Control
With the engine running:
• Press down on the auger control lever. (The auger/impel-
• Release the auger control lever. (The auger/impeller must
Test 2 - Traction Drive Control
With the engine running and speed control in 1st gear:
• Press down on the traction control lever. (The unit should
Backsplit
• Release the traction control lever. (The unit must stop)
Test 3 - Free Hand Control
With the engine running:
• Engage the auger and traction control levers, then
DANGER
ler should rotate)
stop within 5 seconds)
move forward)
release the auger control lever. (Both controls should
remain engaged)
»ÎÊ È»Â»·É» ʾ» ÊÈ·¹Ê¿ÅÄ ¹ÅÄÊÈÅ »̻È
must release)
Åʾ ¹ÅÄÊÈÅÂÉ