Table of Contents
Advertisement
Chapter 3
VIDEO CD
Note: Some discs may not be
compatible due to laser pickup
and design.
Regional Coding
Both the DVD Player and the discs are coded by region.These regional codes
must match in order for the disc to play.This player's code is Region 1. ALL
means all regions. Other regions are: 2: Europe, the Middle East, Rep. of South
Africa, Japan - 3: Southeast Asia,Taiwan - 4: Central America, South America,
Australia, Mexico, New Zealand - 5: Russian Federation, Africa (except Egypt
and Rep. of South Africa), India, Pakistan - 6: China.
How to load and play a disc
Turn on your DVD Player and your TV.
1.
If necessary, tune the TV to its Video Input channel (for help, go to
page 9).
2.
Place a disc gently into the slot with the disc's label facing up (double-
sided discs have content on both sides, so you can place the disc with
either side up).
3.
The DVD Player reads the disc's table of contents, and then one of three
things happens depending on how the disc was programmed:
• The disc starts playing
• The disc menu appears. One of the options will start playing the disc.
Highlight that option and press OK.
• The DVD Player's main menu appears (since the
highlighted, just
Compatible discs
This DVD Player is capable of playing the following types
of discs: DVDs,Video CDs, and CDs with mp3 files,WMA
files (Windows Media Audio), and JPEG files on them.
Before you put a disc in the player, make sure it is
compatible.
You can't play the following types of discs: Laserdiscs,
CD-I, CD-ROM (computer-only discs), DVD-ROM, or
discs recorded using other broadcast standards (i.e. PAL
or SECAM); CD-G discs.
press the OK button).
Playing Discs
Play menu is already
12
Advertisement
Table of Contents
