Hammer Safety Warnings - Bosch Uneo Original Instructions Manual

OBJ_BUCH-1695-004.book Page 10 Friday, September 2, 2016 3:45 PM
10
f Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
f Remove any adjusting key or wrench before turning
the power tool on.
f Do not overreach. Keep proper footing and balance at
all times.
f Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts.
f If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used.
Power tool use and care
f Do not force the power tool. Use the correct power tool
for your application.
f Do not use the power tool if the switch does not turn it
on and off.
f Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools.
f Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.
f Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool's operation. If
damaged, have the power tool repaired before use.
f Keep cutting tools sharp and clean.
f Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Battery tool use and care
f Recharge only with the charger specified by the manu-
facturer.
f Use power tools only with specifically designated bat-
tery packs.
f When battery pack is not in use, keep it away from oth-
er metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another.
f Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help.
Service
f Have your power tool serviced by a qualified repair per-
son using only identical replacement parts.

Hammer Safety Warnings

f Wear ear protectors.
f Use auxiliary handle(s), if supplied with the tool.
f Hold power tool by insulated gripping surfaces when
performing an operation where the cutting accessory
or fastener may contact hidden wiring.
Additional Safety and Working In-
structions
f When transporting and storing, set the rotational di-
rection switch to the centre position.
f Use appropriate detectors to determine if utility lines
are hidden in the work area or call the local utility com-
pany for assistance.
f Before switching on the power tool, make sure that the
application tool moves freely.
f When working with the machine, always hold it firmly
with both hands and provide for a secure stance.
f Secure the workpiece.
f
f Inserting SDS-Quick Drilling Tools: