Time Menu; Setup Menu - RCA J27F636H User Manual

TIME
Go Back
Time
Time Access
Sleep Timer
Wake-Up Timer
Wake-Up Time
Wake-Up Ch.
Schedule
Note: The master user determines what
functions the basic user can access.
SETUP
Go Back
Language
Weak Sig. Disp.
Auto Ch. Search
List & Labels
Ch. Selection
Channel Guide
Closed Caption
Chapter 1
08:00 am
Basic
Off
07:00 am
08
...
English...
None...
...
...
...
...
...
Connections & Setup

Time Menu

This control panel lets you control several time-related functions. Scroll to the
feature you want to set. Use the right arrow button to change the setting.
Go Back Takes you to the previous menu.
Time Displays the current time if the master user has set the time. If allowed by
the master user, the basic user can set the time. Press OK to toggle between am and
pm.
Time Access The master user selects who is able to set and change the current
time:
Basic Basic users are able access the current time
information and can make changes.
Disabled If the master user has set the time, the time
information is available but cannot be changed.
Automatic Basic users are able to access the current time information
but cannot make changes. With this option, if the master user doesn't
set the time, the TV software will try to acquire time information from
broadcasts that provide it.
Sleep Timer Lets you set the TV to turn off after a given time. Press the right
arrow to add 15 minutes to the clock (up to four hours).
Wake-Up Timer Lets the master user set availability to this timer On or Off.
Note: When the ClonePRO remote is used via the TV's DSCI (Digital
Serial Communications Interface) port to turn the TV on and off,
Sleep Timer and Wake-Up Timer settings are nonfunctional.
Wake-Up Time Lets you select the time you want the TV to turn itself on when
the Wake-Up Timer is set.
Wake-Up Channel Lets you select a specific channel the TV tunes to when the
Wake-Up Timer is set.
Schedule Lets you set the TV to turn on and off at specified times on a specified
channel--one time or daily.

Setup Menu

Use this menu for choosing options to get you started watching TV. Scroll to the
feature you want to set. Use the right arrow button to change the setting.
Go Back Takes you to the previous menu.
Language Lets you select your preferred language for the menus.
Weak Signal Display When the signal is weak or there isn't a signal, allows you
to select between these options:
Mute & Blank Displays a gray screen with the message "Unusable Signal"
with the sound muted until a usable signal is found.
None No message is displayed.
Continues on next page...
1