Sound Menu - RCA J27F636H User Manual

SOUND
Go Back
Sound Type
Treble
Bass
Balance
Auto Vol Level
Volume Hold
Def. Lang.
Cur. Lang.
Adv. Settings
The master user determines what functions
the basic user can access.
Chapter 1
Stereo...
3 4
English...
English...
...
Connections & Setup

Sound Menu

Scroll to the feature you want to set. Use the right arrow button to change the
setting.
Go Back Takes you to the previous menu.
Sound Type Choose from Mono, Stereo, Enhanced, and SAP. Stereo splits the
incoming stereo audio signal into left and right channels. Most TV programs and
recorded materials have stereo audio. The word Stereo appears on the TV when
you tune to a program that is broadcast in stereo.
Treble Increases or decreases the high frequency audio.
Bass Increases or decreases the low frequency audio.
Balance Fades between the left and right speakers.
Auto Volume Level Reduces volume blasts during commercial breaks.
Eliminates the need to constantly adjust volume control. Set it On or Off. The
default is Off.
Volume Hold Locks the volume at its' current setting. When this feature is
turned on, mute and other volume controls are disabled.
Default Language Press the right arrow button to choose the language you
prefer for dialog on digital channels. If your preferred language is being broadcast
with a program, the TV will play it. If not, then the TV will play the default audio
for the program (usually English in the U.S.). The default digital channel audio
language options are English, Spanish, German, Italian, Japanese, Chinese and
Korean.
Note: The Default Language menu is available for digital stations
only when using the ANTENNA/CABLE DIGITAL INPUT jack.
Current Language Press the right arrow button to choose the audio language
for the program you're watching. The language you choose becomes your pre-
ferred audio language for all channels on the digital tuner until you turn the TV
off. If the language you choose here is not being broadcast with a program, then
the TV will play the default audio for the program (usually English in the U.S.).
Advanced Settings Press the right arrow button to choose advanced settings.
Initial Volume Sets the TV's volume to the specified level every time it
is turned on.
Minimum Volume Re-scales the volume control slider so that the
far left position is always the minimum allowable volume (but not
necessarily the minimum possible volume).
Maximum Volume Re-scales the volume control slider so that the
far right position is always the maximum allowable volume (but not
necessarily the maximum possible volume).
11