Explanation Of Jacks And Cables - RCA J24F635 User Manual

Audio/Video Jacks
Connections & Setup
TV ANT
TV ANT
DSCI
Port
Out Jack
Digital Audio
Out Jack
TV ANT
Models J24F635 and J27F635
Phone Jacks

Explanation of Jacks and Cables

Y P B P R
This manual covers TV models that have different back panels. Match the back panel of your TV to one of the back panels
shown. This section describes the jacks you can use to make connections. There are several ways to connect components to
Y P B P R
your TV.
S-Video Jack
Audio/Video Jacks
S-Video Jack
TV ANT
Audio/Video Jacks
Digital Audio
Out Jack
TV ANT
Digital Audio
Out Jack
6
VIDEO 1
VIDEO, AUDIO R and L/MONO INPUTS Used to connect components such as a
VCR, DVD player, camcorder, laserdisc player or video game consoles with audio/video
outputs. These jacks are used for most audio/video connections between components.
Note: If your component has only one input for audio (mono), connect it to the left
(white L/Mono) audio jack on the TV and don't connect the right audio part of the
cable.
• R (RIGHT) AUDIO Provides right audio connection. The right audio connector is
usually red.
• L/MONO AUDIO Provides left audio connection. The left audio connector is
usually white.
• VIDEO Provides composite video connection. The video connector is usually
yellow.
• S-VIDEO Provides better picture quality than the video jacks because the color part
of the signal is separated from the black and white part of the picture. When using
S-VIDEO IN, make sure to connect left and right audio cables to the L/MONO and R
AUDIO Input jacks (an S-Video cable is required).
• TV ANT Used to attach either an antenna or cable system to the TV. To connect a
VCR, connect a coaxial cable to the TV ANT jack on your TV and to the Output Jack
on the VCR (sometimes labeled OUT TO TV).
DSCI
Port
TV ANT
Model J32F635
Continues on next page...
Chapter 1