3.2.5.15 Disassembling the Tractor Unit
Remove the tractor unit from the printer.
1.
2.
Remove the cog (17 mm) from the tractor shaft.
3.
Remove the right tractor frame from the tractor shaft and the
4.
Remove E-ring 6 from the tractor shaft.
5.
Remove the right tractor, the paper support unit, and the left tractor from the tractor shaft and tractor
guide shaft.
3.2.5.16 Arranging the Cables
When you assemble the printer, arrange the cables as shown in Figure 3-30.
Figure 3-30. Disassembling the Tractor Unit
Printer Mechanism (Bottom)
Figure 3-30. Arranging the Cables
3-23
guide shaft;
tractor
n
1 o/w93