Table of Contents
Advertisement
To change the color system setting
If the color is abnormal when receiving programs through the
˘ (antenna) terminal or the ... (video input) jack
(1) Press SELECT until "COL SYS" appears.
COL SYS : AUTO
(2) Press + or – to select the appropriate color system until the color is optimal.
AUTO
PAL
SECAM
NTSC 3.58
Tip
• Normally set "COL SYS" to "AUTO".
Skipping program numbers
1
Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.
2
Press SELECT until "MANUAL PROGRAM" appears.
3
Press + or –.
4
Press PIC MODE.
5
Press SELECT.
To preset the skipped program number again
Preset the channel automatically or manually.
Tip
¸
• You can also use SELECT and
skip program numbers.
To use the fine tuning (FINE) function
The fine tuning (FINE) function may help to reduce the following problems: double
images and lines moving across the TV screen.
You can use the fine tuning function as below:
(1) Select the program number you want to adjust.
(2) Press SELECT until "MANUAL PROGRAM" appears on the screen.
(3) Press + or – on the remote control once.
(4) Press
to display "FINE" on the screen.
(5) Press + or – continuously until the above problems are minimized.
The + or – icon on the screen flashes while tuning.
(6) Press SELECT to return to normal screen.
NTSC 4.43
+/– on the TV to preset channels and
9
Using Your New TV
Watching the TV
This section explains functions used
while watching the TV. Most operations
can be done using the remote.
1
Press U to turn on the TV.
When the TV is in the
standby mode (the u
indicator on the TV is lit
red), press u on the remote
or PROGR +/– on the TV.
2
Press PROGR +/– or the
number buttons to select
PROGR
the TV program.
For double digit numbers,
press ÷, then the number
(e.g., for 25, press ÷, then
2 and 5).
3
Press . +/– to adjust the
volume.
10
Using Your New TV
¤
u
...
;
Number buttons
JUMP
. +/–
PROGR +/–
SELECT
+ or –
1
2
3
4
5
6
or
7
8
9
-/--
0
Advertisement
Table of Contents
