Troubleshooting - D-Link DWR-330 User Manual

4 Troubleshooting

1. Why can't I access to the web setting page in HSIA Router mode?
Ans:
1. Please check if the LED is illuminating.
2. Please make sure if you Clients has connected to device.
3. The default IP address is 192.168.0.1, please make sure you have typed it correctly
in your web browser. If you have change the Login IP Address and forgotten it, please
restore device to the default.
4. If the DHCP service is not enabled and the clients are set to obtain IP addresses
dynamically, the clients cannot access the Internet. In this case, enable the DHCP
service. For details, see "DHCP-DHCP Server".
2. How to restore to default router settings?
Ans: Find a pinpoint and stab into "Reset" hole for 3 seconds.
OR
1. Please connect to Mobile WIFI Router and log in the router web setting page, the
default IP address is http://192.168.0.1.
2. Open the page for "System-> Restore Defaults" and click on "Restore" button.
3. Why the Signal LED is illuminating in RED?
Ans: Please make sure you are in a location covered by communication networks.
4. Why Clients Cannot Access the Internet Properly?
1. Please check if the LED is illuminating.
2. Please make sure if you Clients has connected to device.
3. Check if the PPP user name and password are correct.
5. Why can't I see SSID appears in the wireless network?
Ans:
1. Please make sure your device is start correctly.
2. Please check the web setting page and make sure you have select the "Enabled"
radio button to enable the "Broadcast SSID".
6. Why multi-Network IP Address Conflict Occurs?
When multiple types of Internet connections are used simultaneously on the client,
such as physical network adapter and Wi-Fi, inserting the Mobile WiFi into the client
may result in IP address conflict across multiple networks. Please disable other
network devices or disconnect other Internet connections from the client, and then
restart the client.
14