IBM ThinkPad G40 Hardware Maintenance Manual page 85

Loosen the two screws at 2 about half-way out. Then,
push down firmly on both screws in the direction of the
arrow 3 to disconnect the PC card slot assembly from
the system board.
Step Screw (quantity)
2
M2.5 × 8 mm, Black (2)
Push the PC card eject buttons 4 to pop the buttons out.
While holding the PC card door down, pull on the PC card
eject buttons and carefully remove the PC card slot
assembly 5 .
(continued)
Removing and replacing a FRU
ThinkPad G40, G41
Torque
0.3 Nm
(3.2 kgfcm)
81