The Front Of Your Tv; Front Input Jacks; Front Panel Buttons; Plug In The Tv - RCA 24F650T User Manual

Thomson/rca television user's guide
Table of Contents

Advertisement

Available languages

Available languages

Connections & Setup
MESSAGE
VIEW
HEAR
VOICE
STOP
ALARM
MENU/OK
CH
CH
VOL
VOL
READY
ADVISORY
WATCH
WARNING
AUDIO
L/MONO
H-PHONE

Front Panel Buttons

If you cannot locate your remote, you can use the front panel buttons of your TV
to operate many of the TV's features.
MENU/OK Brings up the Main menu. In the menu system, it selects highlighted
items.
CH v Scans down through the current channel list. In the menu system, acts like
the down arrow button on the remote control and adjusts menu controls.
CH
Scans up through the channel list. In the menu system, acts like the up
arrow button on the remote control and adjusts menu controls.
VOL < Decreases the volume. In the menu system, acts like the left arrow button
on the remote control and adjusts menu controls.
VOL > Increases the volume. In the menu system, acts like the right arrow button
on the remote control and adjusts menu controls.
POWER Turns the TV on and off.

Plug in the TV

Plug the end of the power cord into a grounded wall outlet. Insert the plug
completely into the outlet.
6
Graphics contained within this publication are for representation only.

The Front of Your TV

Front Input Jacks

The TV has front input jacks for your convenience: one set of
audio/video inputs, an S-Video and a headphone jack. These
jacks are towards the front of the TV on the side. To access
the component you connected to the front of the TV, press
the INPUT button on your remote until FRNT appears on the
screen. The jacks are ideal for connecting a video game
POWER
console or a camcorder.
VIDEO
R
H-PHONE Allows you to connect headphones to listen to
the sound coming from the TV.
L/MONO and R AUDIO Receives audio from another
component such as a VCR, camcorder, or video game console.
VIDEO Receives video from another component such as a
VCR, camcorder, or video game console.

Put batteries in the remote

• Remove the battery compartment cover from the back of
• Insert 2 fresh "AA" batteries. Make sure the polarities (+
• Replace the cover.
Note: When connecting a component that only has one audio jack,
such as some camcorders, use the TV's AUDIO L/MONO jack to hear
the audio.
the remote by pushing down on and sliding off the cover.
and -) are aligned correctly.
Chapter 1

Advertisement

Table of Contents
loading

Table of Contents