Configuring Watch Settings; Returning The Watch To Its Factory Default; Changing The Home City Summer Time Setting; Checking The Watch Charge Level - Casio 5519 Operation Manual

Configuring Watch Settings

You can use CASIO WATCH+ to specify the
amount of time until the Bluetooth connection
is automatically terminated, and to configure
other settings.
1.
Y Tap the "CASIO WATCH+" icon.
2.
X Hold down the (C) button for about 1.5
seconds.
The second hand will move to "R". Keep
●
(C) depressed until the second hand
starts moving again and then stop at
"R".
The second hand will move to e when a
●
connection is established between the
watch and phone.
3.
Y Tap in the following sequence: f n
"Watch settings".
4.
Y Select the setting you want to change
and then perform the operation shown on
the phone screen.
Returning the Watch to Its
Factory Default Settings
This section explains how to use CASIO
WATCH+ to return the watch settings below
to their initial factory defaults.
Time adjustment
●
World time
●
Alarm
●
Stopwatch
●
Connection time
●
1.
X Pull out the crown to the second click.
2.
X Hold down (C) for about 5 seconds.
This will cause the second hand to
perform one revolution and return the
applicable settings to their factory
defaults.
Hours Minutes
Mode hand
Operation Guide 5519
Changing the Home City
Summer Time Setting
1.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
2.
X Hold down the (C) button for about 1.5
seconds.
The second hand will move to "R". Keep
●
(C) depressed until the second hand
starts moving again and then stop at
"R".
The second hand will move to e when a
●
connection is established between the
watch and phone.
3.
Y Tap in the following sequence: f n
"Watch settings".
4.
Y Tap "Summer time setting".
5.
Y Select the summer time switching
method you want to use.
"Auto"
●
The watch switches between standard
time and summer time automatically.
"OFF"
●
The watch always indicates standard
time.
"ON"
●
The watch always indicates summer
time.
6.
Y Perform the operation shown on the
phone screen.
Crown
Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with CASIO WATCH+.
1.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
2.
X Hold down the (C) button for about 1.5
seconds.
The second hand will move to "R". Keep
●
(C) depressed until the second hand
starts moving again and then stop at
"R".
The second hand will move to e when a
●
connection is established between the
watch and phone.
3.
Y Use CASIO WATCH+ to check the
charge level.

Connection

Connecting with a Phone

This section explains how to establish a
Bluetooth connection between a phone that is
paired with the watch.
If the watch is not paired with the phone you
●
want to connect with, perform the procedure
under "C Pairing the watch with a
pair them.
1.
Move the phone close to (within one meter
of) the watch.
2.
X While the second hand is not pointing to
e, hold down the (C) button for about 1.5
seconds.
The second hand will move to "R". Keep
●
(C) depressed until the second hand
starts moving again and then stop at
"R".
The second hand will move to e when a
●
connection is established between the
watch and phone.
phone" to
9